Version: 7.2

Error Response Knowledge Base

tip

This article applies to ODS/API 7.2 and above, and to the new Data Management Service.

The Ed-Fi ODS/API adheres to the REST principles when responding to HTTP requests, including the use of standard status codes in HTTP responses. Beginning with version 7.2, the ODS/API implements the Problem Details RFC 9457. This standardizes API error responses and enables machine-readable error details within the HTTP response content.

The following fields included in the API error response are noteworthy:

type: This field uniquely identifies the error type as specified in RFC 9457. type is defined as a URI where each segment represents a level in the hierarchy into which the errors types are organized. For example, urn:ed-fi:api:security:authorization:access-denied:resource and urn:ed-fi:api:security:authorization:access-denied:action identify specific issue types within the context of an authorization error.
detail: The detail field provides a user-friendly description of the encountered issue.
validationErrors: In the case of bad request errors, the response includes a validationErrors extension member. This member contains JSON paths to each field with an error in the request JSON. All data validation errors are reported in a single response rather than progressively, reducing the number of attempts during data submission.
errors: Sometimes, additional details are provided in the errors extension member. This allows for supplementary descriptions aimed at API client developers and API hosts to facilitate the identification and resolution of errors.
correlationId: This field allows traceability of the specific occurrence of the error and connects error response to entries in the API errors logs.

tip

The type, detail, and validationErrors fields help end-users resolve data submission problems and report the correlationId for issues needing escalation. The errors field aids the API hosting provider or development team in identifying the error’s root cause.

This document aims to catalog most of the Ed-Fi ODS/API error responses, supplemented with additional notes (where applicable) to provide source system users and application developers with insights into how to handle each situation effectively.

tip

Each example below provides a brief description of the problem, a sample HTTP request, and a comment about how to resolve. Broadly speaking, there are three possibilities for error resolution:

The problem may exist in application code → send to the application development team for resolution.
It could be on the hosting side → report to the hosting provider / IT Operations team for resolution.
Missing or invalid source system data → report to an appropriate application user to correct the data and resubmit.

400 Bad Request

urn:ed-fi:api:bad-request:data-validation-failed:key-change-not-supported

Identifying values for the resource cannot be changed

A PUT request can update natural key fields on specific resources. If the resource does not permit changes to its key, the PUT request will fail. Natural key fields are identified in OpenAPI metadata with

x-Ed-Fi-isIdentity specification extension. PUT actions that permit updating natural key fields are marked with the x-Ed-Fi-isUpdatable specification extension.

Example

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/programs/092a2f5eaaa5491aa575ffdd5ec662ef
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
    "educationOrganizationReference": {
      "educationOrganizationId": 255901
    },
    "programName": "Bilingual Summer - Updated",
    "programTypeDescriptor": "uri://ed-fi.org/ProgramTypeDescriptor#Bilingual Summer",
    "programId": "2"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Identifying values for the Program item cannot be changed. Delete and recreate the item instead.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed:key-change-not-supported",
  "title": "Key Change Not Supported",
  "status": 400,
  "correlationId": "94bd4093-faab-4bba-8d02-4ddd5d1cd97f"
}

Problem is in the application code → send to application development

team for resolution.

Review the Swagger UI documentation to find all Identity fields
Review the Swagger UI documentation to verify if the resource supports changes identity fields

Resource identifiers cannot be assigned by the client

A POST request should not contain an id value. This value is auto-assigned by the API application.

Example

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
  "id": "a49a738b92b74a94a91ac7fa3bb19b15",
  "codeValue": "Bereavement",
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor",
  "shortDescription": "Bereavement"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "The request data was constructed incorrectly.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "6ea8c4b1-3fa4-42d8-8a19-608866169237",
  "errors": [
    "Resource identifiers cannot be assigned by the client. The 'id' property should not be included in the request body."
  ]
}

tip

Problem is in the application code → send to application development team for resolution.

Remove the id value from the payload when POSTing a request.

Missing a Required Property

The data model for every endpoint includes one or more required property / field.

Example: Missing one required property, codeValue

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor",
  "shortDescription": "Bereavement"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "27c1a389-8714-423a-a049-a8d9aa7188a7",
  "validationErrors": {
    "$.codeValue": [
      "CodeValue is required."
    ]
  }
}

Example: missing two required properties, codeValue and shortDescription

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "486c1ae7-5bd4-4f12-83cd-804b8e6f57d8",
  "validationErrors": {
    "$.codeValue": [
      "CodeValue is required."
    ],
    "$.shortDescription": [
      "ShortDescription is required."
    ]
  }
}

tip

Problem is in the client application code → send to application development team for resolution.

Review the detailed error message, which includes the fields error applies to.
Review the Swagger UI documentation to find required fields.
Each data model is available in a collection at the bottom of the page, or you can expand the various HTTP requests and find the model embedded within it. Example:

String Length Validation Error

The Ed-Fi Data Model prescribes a maximum string length in many cases. The application code needs to truncate strings to fit, if they are larger than the data model's allowed length.

Example: codeValue is longer than 50 characters

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
  "codeValue": "Bereavementddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddd",
  "shortDescription": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "5922d868-ba68-472a-9317-d36d640ce362",
  "validationErrors": {
    "$.codeValue": [
      "CodeValue must be at most 50 characters in length."
    ]
  }
}

tip

Problem is in the client application code → send to application development team for resolution.

Review the detailed error message, which includes the max length value and which field it applies to.
For proactive analysis, review the Swagger UI documentation to find other maximum string lengths.
Each data model is available in a collection at the bottom of the page, or you can expand the various HTTP requests and find the model embedded within it. Example:

Non-Compliant JSON Body

What happens if the JSON body on a POST or PUT request is not valid? Generally, you get a detailed message telling you exactly where to look for the error.

Example

An extra comma after the schoolId value. One trailing comma is fine, but two is an error.

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/academicWeeks
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "weekIdentifier": "one",
  "schoolReference": {
    "schoolId": 17012391,,
  },
  "beginDate": "2023-09-11",
  "endDate": "2023-09-11"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "9be25ce0-1333-4bee-b5b3-d98370441283",
  "validationErrors": {
    "$.schoolReference.schoolId": [
      "Invalid property identifier character: ,. Path 'schoolReference.schoolId', line 4, position 25."
    ],
    "$.schoolReference.schoolId.schoolReference": [
      "Invalid property identifier character: ,. Path 'schoolReference.schoolId', line 4, position 25."
    ]
  }
}

Example: missing closing curly brace before beginDate

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/academicWeeks
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "weekIdentifier": "one",
  "schoolReference": {
    "schoolId": 17012391,

  "beginDate": "2023-09-11",
  "endDate": "2023-09-11"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "bab81165-44ca-4c42-af43-daf0109b9b5d",
  "validationErrors": {
    "$.schoolReference": [
      "Unexpected end when deserializing object. Path 'schoolReference', line 8, position 1."
    ]
  }
}

tip

Problem is in the client application code → send to application development team for resolution.

Review the code for building the JSON payload.
Ideally use an object serializer rather building JSON by hand.

Integer Overflow

Most integers in an Ed-Fi API resource are Int32 (max value: 2,147,483,647), though a few may be Int64 starting with ODS/API 7.0 (max value:9,223,372,036,854,775,807).

Example

When communityOrganizationId is set to a too large value to hold in Int64 field

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/communityOrganizations
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
    "communityOrganizationId": 25590111111122222222222222222222222222222,
    "nameOfInstitution": "Communities in Schools",
    "shortNameOfInstitution": "CIS",
    "addresses": [],
    "categories": [
      {
        "educationOrganizationCategoryDescriptor": "uri://ed-fi.org/EducationOrganizationCategoryDescriptor#Other"
      }
    ],
    "identificationCodes": [
      {
        "educationOrganizationIdentificationSystemDescriptor": "uri://ed-fi.org/EducationOrganizationIdentificationSystemDescriptor#SEA",
        "identificationCode": "19"
      }
    ]
  }

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "a0d880d3-8698-4f68-8a07-b5c8688ebc2e",
  "validationErrors": {
    "$.communityOrganizationId": [
      "Error converting value 25590111111122222222222222222222222222222 to type 'System.Int64'. Path 'communityOrganizationId', line 2, position 72."
    ]
  }
}

Excessive String Length

Many properties that take a string value have a maximum length associated with them.

Example

rating on accountabilityRatings has a max length of 35 characters.

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/accountabilityRatings
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901
  },
  "schoolYearTypeReference": {
    "schoolYear": 2014
  },
  "ratingTitle": "0eo0nvikbcrieawaybmhipgao8sjnxgl",
  "rating": "This has more than 35 characters in it"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "d1f1a774-93f9-4c4a-80a8-d3cd3d950513",
  "validationErrors": {
    "$.rating": [
      "Rating must be between 1 and 35 characters in length."
    ]
  }
}

tip

Problem is in the client application code → send to application development team for resolution.

Ensure that a non-empty payload is being transmitted.
Ensure that all required properties are included in that payload.

Empty Request Body

In the previous example, the request does have a body, it just doesn't have any properties in it. What happens if you don't send a body at all?

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/schools
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
    "detail": "The request could not be processed. See 'errors' for details.",
    "type": "urn:ed-fi:api:bad-request",
    "title": "Bad Request",
    "status": 400,
    "correlationId": "5eb5ee73-ca29-4af3-b6f9-67f81087128a",
    "errors": [
        "A non-empty request body is required."
    ]
}

tip

Problem is in the client application code → send to application development team for resolution.

Ensure that a JSON payload is generated and attached to the POST or PUT command.

Transmitting in the Wrong Character Encoding

The Ed-Fi ODS/API expects UTF-8 character encoding. In the following example, the content-type is set as UTF-16, but the content is actually in UTF-8.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/accountabilityRatings
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901
  },
  "schoolYearTypeReference": {
    "schoolYear": 2014
  },
  "ratingTitle": "0eo0nvikbcrieawaybmhipgao8sjnxgl",
  "rating": "This has more than 35 characters in it"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
 "detail": "The request could not be processed. See 'errors' for details.",
    "type": "urn:ed-fi:api:bad-request",
    "title": "Bad Request",
    "status": 400,
    "correlationId": "02951ccd-c52e-477b-8aa9-614c07dae495",
    "errors": [
        "Unexpected character encountered while parsing value: ൻ. Path '', line 0, position 0."
    ]
}

tip

Problem is in the client application code → send to application development team for resolution.

Make sure the content-type is UTF-8, not anything else.

Potentially Dangerous Value

Un-escaped HTML will be rejected in the validation process, as a protection for avoiding potential cross-site scripting attacks against other applications that consume data from the Ed-Fi ODS/API.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/accountabilityRating
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901
  },
  "schoolYearTypeReference": {
    "schoolYear": 2014
  },
  "ratingTitle": "0eo0nvikbcrieawaybmhipgao8sjnxgl",
  "rating": "<script>alert('hello world!')</script>"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "0300251b-58ae-4974-9f13-37a1f76643af",
  "validationErrors": {
    "$.rating": [
      "Rating must be between 1 and 35 characters in length.",
      "Rating contains a value that could be dangerous for downstream systems using this data. Try to avoid the use of special symbols like '<', '>' or '&' without surrounding spaces."
    ]
  }
}

tip

Problem is in the application code → send to application development team for resolution.

Encode the < character as <

"rating": "&lt;script>alert('hi')&lt;/script>"

Also, it might be good to take this up with your internal security team, as this may mean that a source system user is trying to perform a malicious injection attack on your application.

Leading or Trailing Whitespace in Natural Key String

Strings that compose the natural key on a resource cannot have a space in the initial or last position of the string.

Example: ratingTitle contains leading and trailing white spaces

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/accountabilityRating
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901
  },
  "schoolYearTypeReference": {
    "schoolYear": 2014
  },
  "ratingTitle": " rating title ",
  "rating": "rating9"
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "b1aeec40-f708-4217-80f4-195b7507f049",
  "validationErrors": {
    "$.ratingTitle": [
      "RatingTitle cannot contain leading or trailing spaces."
    ]
  }
}

tip

Problem is in the client application code → send to application development team for resolution.

If the source system allows this, then strip spaces from the front or back of the string.

No Item in Required Array

Some resources have required arrays / collections on them. The error message is specific to the circumstance of an empty array in the JSON payload.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/bellSchedules
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "bellScheduleName": "one",
  "classPeriods": [],
  "schoolReference": {
    "schoolId": 255901
  }
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "c3f52d08-d84c-430a-8523-014a5a47c5d2",
  "validationErrors": {
    "$.classPeriods": [
      "BellScheduleClassPeriods must have at least one item."
    ]
  }
}

Missing a Required Property on an Item in a Collection

Some resources have collections (arrays) of information, and the model for that collection may include required fields. The error message will help guide you not only to the field, but also which entry in the collection has the problem.

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/assessments
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "assessmentIdentifier": "_01774fa3-06f1-47fe-8801-c8b1e65057f3_",
  "namespace": "uri://ed-fi.org/Assessment/Assessment.xml",
  "assessmentCategoryDescriptor": "uri://ed-fi.org/AssessmentCategoryDescriptor#Benchmark test",
  "assessmentTitle": "3rd Grade Reading 1st Six Weeks 2021-2022",
  "academicSubjects": [
    {
      "academicSubjectDescriptor": "uri://ed-fi.org/AcademicSubjectDescriptor#English Language Arts"
    }
  ],
  "identificationCodes": [
    {
      "assessmentIdentificationSystemDescriptor": "uri://ed-fi.org/AssessmentIdentificationSystemDescriptor#Test Contractor",
      "identificationCode":  "01774fa3-06f1-47fe-8801-c8b1e65057f3"
    }
  ],
  "scores": [
    {
      "assessmentReportingMethodDescriptor": "uri://ed-fi.org/AssessmentReportingMethodDescriptor#Percentile",
      "maximumScore": "99",
      "minimumScore": "1",
      "resultDatatypeTypeDescriptor": "uri://ed-fi.org/ResultDatatypeTypeDescriptor#Integer"
    },
    {
      "maximumScore": "10",
      "minimumScore": "0",
      "resultDatatypeTypeDescriptor": "uri://ed-fi.org/ResultDatatypeTypeDescriptor#Integer"
    }
  ],
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8


{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "f3caf6e9-a1dd-4441-bfca-c524079585dc",
  "validationErrors": {
    "$.scores[1].assessmentReportingMethodDescriptor": [
      "AssessmentReportingMethodDescriptor is required."
    ]
  }
}

tip

Problem is in the application code → send to application development team for resolution.

Review the model definition.
The error message points to item [1] ; in zero-based indexing, that is the second entry. Note that there is a "typo" with an underscore at the beginning of the assessmentReportingMethodDescriptor key.

Key Unification Error

Due to the Key Structure in the Ed-Fi ODS / API, a single resource may contain a certain property, and it may reference another object that has that same property. Often, the two values should be the same for consistency. We call this "key unification". The example below has some interesting features:

The school year and school Id at the root of the object should match those values found in the calendar reference (example of unification)
There is also "class of" school year - naturally, this will be different, since it represents the expected graduation date of the student.
Finally, there is a graduation plan that also has a school year. Typically one would expect that the graduation plan year would match the class of school year - but conceivably these may differ at times. A student might nominally be in a particular class, but planning on graduating early.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentSchoolAssociations
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "schoolYearTypeReference": {
     "schoolYear": 2023
   },
  "calendarReference": {
    "calendarCode": "2010605675",
    "schoolYear": 2022,
    "schoolId": 255901107
  },
  "classOfSchoolYearTypeReference": {
    "schoolYear": 2027
  },
  "schoolReference": {
    "schoolId": 338978318
  },
  "studentReference": {
    "studentUniqueId": "8y0mfuzfnffmdk00sgizqy5sj80kvanm"
  },
  "entryDate": "2023-03-18",
  "entryGradeLevelDescriptor": "uri://ed-fi.org/GradeLevelDescriptor#First grade",
  "graduationPlanReference": {
    "educationOrganizationId": 17012391,
    "graduationPlanTypeDescriptor": "uri://ed-fi.org/GraduationPlanTypeDescriptor#Standard",
    "graduationSchoolYear": 2020
  }
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "223140e5-0839-43c1-8813-c92a0d995abe",
  "validationErrors": {
    "$.schoolReference.schoolId": [
      "All values supplied for 'schoolId' must match. Review all references and align the following conflicting values: '338978318', '255901107'"
    ],
    "$.calendarReference.schoolId": [
      "All values supplied for 'schoolId' must match. Review all references and align the following conflicting values: '338978318', '255901107'"
    ],
    "$.calendarReference.schoolYear": [
      "All values supplied for 'schoolYear' must match. Review all references and align the following conflicting values: '2022', '2023'"
    ],
    "$.schoolYearTypeReference.schoolYear": [
      "All values supplied for 'schoolYear' must match. Review all references and align the following conflicting values: '2022', '2023'"
    ]
  }
}

tip

Problem may be in the application code → send to application development team for resolution.

Review the model definition.
Ensure that the right values are being transmitted. However, this conceivably might be a source system problem that requires modification by an end user, if the source system itself allows for selecting a combination of values that are logically inconsistent in this way.

Invalid Limit Count

Client applications issuing GET requests, with or without search terms, can control how many records come back from a request - up to a maximum count. By default that max count is 500.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentSchoolAssociations
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
    "message": "Limit must be omitted or set to a value between 1 and max value defined in configuration file (defaultPageSizeLimit)."
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
    "detail": "The limit parameter was incorrect.",
    "type": "urn:ed-fi:api:bad-request:parameter-validation-failed",
    "title": "Parameter Validation Failed",
    "status": 400,
    "correlationId": "0a13ceb8-e392-4318-8340-c60d015d25b5",
    "errors": [
        "Limit must be omitted or set to a value between 0 and 500."
    ]
}

tip

Problem is in the application code → send to application development team for resolution.

Change the limit to be no more than 500.
Reach out to the hosting provider if 500 still generates this error, to find out what lower limit they have set.

Descriptor Does Not Exist

This error occurs when the HTTP request structure is good, but one or more descriptor value does not exist.

Example: bad descriptor codeValue

HTTP Request

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentAcademicRecords/d074a26cec7449299f701ba54e0f0257
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
    "educationOrganizationReference": {
      "educationOrganizationId": 255901001
    },
    "schoolYearTypeReference": {
      "schoolYear": 2022
    },
    "studentReference": {
      "studentUniqueId": "604823"
    },
    "termDescriptor": "uri://ed-fi.org/TermDescriptor#Spring Semester Missing",
    "cumulativeEarnedCredits": 13.5,
    "academicHonors": [],
    "diplomas": [],
    "gradePointAverages": [
      {
        "gradePointAverageTypeDescriptor": "uri://ed-fi.org/GradePointAverageTypeDescriptor#Unweighted",
        "gradePointAverageValue": 3.8571,
        "isCumulative": true
      }
    ]
  }

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "f239fe05-d89c-4c2d-9bfd-a42a272e5f30",
  "validationErrors": {
    "$.termDescriptor": [
      "TermDescriptor value 'uri://ed-fi.org/TermDescriptor#Spring Semester Missing' does not exist."
    ]
  }
}

Example: bad namespace

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentAcademicRecords
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901001
  },
  "schoolYearTypeReference": {
    "schoolYear": 2022
  },
  "studentReference": {
    "studentUniqueId": "604874"
  },
  "termDescriptor": "uri://wrong.org/TermDescriptor#Fall Semester",
  "gradePointAverages": [
    {
      "gradePointAverageTypeDescriptor": "uri://ed-fi.org/GradePointAverageTypeDescriptor#Unweighted",
      "gradePointAverageValue": 4,
      "isCumulative": true
    }
  ]
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
  "detail": "Data validation failed. See 'validationErrors' for details.",
  "type": "urn:ed-fi:api:bad-request:data-validation-failed",
  "title": "Data Validation Failed",
  "status": 400,
  "correlationId": "ba257c38-333c-476b-b75c-c76e16db218f",
  "validationErrors": {
    "$.termDescriptor": [
      "TermDescriptor value 'uri://wrong.org/TermDescriptor/TermDescriptor#Spring Semester' does not exist."
    ]
  }
}

tip

The problem could be in either the application code or in the source system, depending on how descriptor values are mapped: most systems will have a mapping from their own code set to Ed-Fi descriptors, but there may be special cases where an application user is manually entering a value into the source system user interface.

Review how the descriptor value is created in the synchronization process
- is it in code or in the user interface?
Forward the problem to the appropriate group: application development team, or source system users.

urn:ed-fi:api:profile:invalid-profile-usage

Invalid Profile Usage

Example 1: PUT/POST request when read-only profile is in use

HTTP Request

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/schools/310a0f89ada9413e9e9e46187bb1d10d
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/vnd.ed-fi.school.sample-profile-resource-readonly.readable+jso; charset=utf-8

{
        "localEducationAgencyReference": {
            "localEducationAgencyId": 255901
        },
        "schoolId": 255901044,
        "nameOfInstitution": "Grand Bend Middle School",
        "operationalStatusDescriptor": "uri://ed-fi.org/OperationalStatusDescriptor#Active",
        "shortNameOfInstitution": "GBMS",
        "webSite": "http://www.GBISD.edu/GBMS/",
        "charterStatusDescriptor": "uri://ed-fi.org/CharterStatusDescriptor#Not a Charter School",
        "schoolTypeDescriptor": "uri://ed-fi.org/SchoolTypeDescriptor#Regular",
        "educationOrganizationCategories": [
            {
                "educationOrganizationCategoryDescriptor": "uri://ed-fi.org/EducationOrganizationCategoryDescriptor#School"
            }
        ],
        "gradeLevels": [
            {
                "gradeLevelDescriptor": "uri://ed-fi.org/GradeLevelDescriptor#Sixth grade"
            },
            {
                "gradeLevelDescriptor": "uri://ed-fi.org/GradeLevelDescriptor#Seventh grade"
            },
            {
                "gradeLevelDescriptor": "uri://ed-fi.org/GradeLevelDescriptor#Eighth grade"
            }
        ]
    }

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
    "detail": "The request construction was invalid with respect to usage of a data policy.",
    "type": "urn:ed-fi:api:profile:invalid-profile-usage",
    "title": "Invalid Profile Usage",
    "status": 400,
    "correlationId": "54e1e704-72a4-4bcd-b455-9c483352a84b",
    "errors": [
        "A profile-based content type that is readable cannot be used with PUT requests."
    ]
}

urn:ed-fi:api:profile:invalid-method-usage

Invalid Method Usage

Details

Example

HTTP Request

POST http://localhost:8765/data/v3/ed-fi/schools
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/vnd.ed-fi.school.test-profile-resource-readonly.writable+json; charset=utf-8

{
    "localEducationAgencyReference": {
        "localEducationAgencyId": "255901"
    },
    "schoolId": "124548",
    "nameOfInstitution": "Grand Bend Elementary School",
    "educationOrganizationCategories": [
        {
            "educationOrganizationCategoryDescriptor": "uri://ed-fi.org/EducationOrganizationCategoryDescriptor#School"
        }
    ],
    "gradeLevels": [
        {
            "gradeLevelDescriptor": "uri://ed-fi.org/GradeLevelDescriptor#Eleventh grade"
        }
    ]
}

HTTP Response

HTTP/1.1 400 Bad Request
Content-Type: application/json; charset=utf-8

{
    "detail": "The request construction was invalid with respect to usage of a data policy.",
    "type": "urn:ed-fi:api:profile:invalid-profile-usage",
    "title": "Invalid Profile Usage",
    "status": 400,
    "correlationId": "54e1e704-72a4-4bcd-b455-9c483352a84b",
    "errors": [
        "A profile-based content type that is readable cannot be used with PUT requests."
    ]
}

401 Unauthorized

urn:ed-fi:api:security:authentication

Missing Authorization header

Details

Example

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Content-Type: application/json

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 401 Unauthorized
Content-Type: application/json; charset=utf-8

{
    "detail": "The caller could not be authenticated.",
    "type": "urn:ed-fi:api:security:authentication",
    "title": "Authentication Failed",
    "status": 401,
    "correlationId": "609a10fd900f",
    "errors": [
        "Authorization header is missing."
    ]
}

Unsupported Authorization header scheme

Details

Example

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: basic am9obmRvZToxMjM=
Content-Type: application/json

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 401 Unauthorized
Content-Type: application/json; charset=utf-8

{
    "detail": "The caller could not be authenticated.",
    "type": "urn:ed-fi:api:security:authentication",
    "title": "Authentication Failed",
    "status": 401,
    "correlationId": "2d324c48a6a6",
    "errors": [
        "Unknown Authorization header scheme."
    ]
}

Missing or blank token in the Authorization header

Details

Example

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer
Content-Type: application/json

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 401 Unauthorized
Content-Type: application/json; charset=utf-8

{
    "detail": "The caller could not be authenticated.",
    "type": "urn:ed-fi:api:security:authentication",
    "title": "Authentication Failed",
    "status": 401,
    "correlationId": "fac433711bda",
    "errors": [
        "Missing Authorization header bearer token value."
    ]
}

Expired or invalid token in the Authorization header

Details

Example

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer 123
Content-Type: application/json

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 401 Unauthorized
Content-Type: application/json; charset=utf-8

{
    "detail": "The caller could not be authenticated.",
    "type": "urn:ed-fi:api:security:authentication",
    "title": "Authentication Failed",
    "status": 401,
    "correlationId": "1745dc8cc91c",
    "errors": [
        "Invalid Authorization header."
    ]
}

tip

Problem is in the client application code → send to application development team for resolution.

Did the token time out? If so, re-authenticate with client credentials.
- The token timeout period defaults to 30 minutes, but that value can be modified by the application host.
Inspect the HTTP request to ensure it is well formatted. For more information on authentication and authorization in ODS/API 7.1, see Authentication and Authorization. This guidance is generally correct for all supported versions of the ODS/API.

403 Forbidden

urn:ed-fi:api:security:data-policy:incorrect-usage

Data Policy Failure Due to Incorrect Usage

This occurs when a client attempts to use a profile-specific content type that has not been assigned to it, or does not specify a covering writable profile-specific content type when attempting to create or modify a resource which requires one for updates.

Example: The caller is assigned a profile and requests a covered resource using a different profile's content type.

Details

Example

HTTP Request

GET http://localhost:8765/data/v3/ed-fi/students/82b0fb10c78e43a29ecd2d286ddc10c3
Accept: application/vnd.ed-fi.student.test-profile-studentonly2-resource-includeall.readable+json
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

HTTP Response

{
    "detail": "A data policy failure was encountered. The request was not constructed correctly for the data policy that has been applied to this data for the caller.",
    "type": "urn:ed-fi:api:security:data-policy:incorrect-usage",
    "title": "Data Policy Failure Due to Incorrect Usage",
    "status": 403,
    "errors": [
        "Based on profile assignments, the following profile-specific content type is required when requesting this resource: 'application/vnd.ed-fi.student.test-profile-studentonly-resource-includeall.readable+json'"
    ]
}

urn:ed-fi:api:security:authorization:namespace:access-denied:namespace-mismatch

Invalid Namespace Prefix

Most of these 403 message refer to the portion of the Ed-Fi ODS/API that uses the client's relationship to an education organization as the basis for resource authorization. There is another approach to securing access to resources, which is particularly used with Assessments: namespace prefix. When an API client is created, it is given access to one or more namespace prefixes. For resources secured by namespace, the client credentials can only perform actions on objects that match the assigned namespace prefix. In the following example, the namespace submitted with resource is "uri://example.org/Assessment/Assessment.xml", but the client credentials were configured for "[uri://ed-fi.org]" prefix instead.

Details

Example

HTTP Request

 POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/assessments
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "assessmentIdentifier": "_01774fa3-06f1-47fe-8801-c8b1e65057f3_",
  "namespace": "uri://example.org/Assessment/Assessment.xml",
  "assessmentCategoryDescriptor": "uri://ed-fi.org/AssessmentCategoryDescriptor#Benchmark test",
  "assessmentTitle": "3rd Grade Reading 1st Six Weeks 2021-2022",
  "academicSubjects": [
    {
      "academicSubjectDescriptor": "uri://ed-fi.org/AcademicSubjectDescriptor#English Language Arts"
    }
  ],
  "identificationCodes": [
    {
      "assessmentIdentificationSystemDescriptor": "uri://ed-fi.org/AssessmentIdentificationSystemDescriptor#Test Contractor",
      "identificationCode":  "01774fa3-06f1-47fe-8801-c8b1e65057f3"
    }
  ],
  "scores": [
    {
      "assessmentReportingMethodDescriptor": "uri://ed-fi.org/AssessmentReportingMethodDescriptor#Percentile",
      "maximumScore": "99",
      "minimumScore": "1",
      "resultDatatypeTypeDescriptor": "uri://ed-fi.org/ResultDatatypeTypeDescriptor#Integer"
    }
  ]
}

HTTP Response

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized. The 'Namespace' value of the data does not start with any of the caller's associated namespace prefixes ('uri://ed-fi.org', 'uri://gbisd.edu', 'uri://tpdm.ed-fi.org').",
  "type": "urn:ed-fi:api:security:authorization:namespace:access-denied:namespace-mismatch",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "07572303-6c72-4ab3-aa71-ab345d66b82b"
}

tip

Problem is in the client application code → send to application development team for resolution.

Is the correct namespace being transmitted? If that is correct, then it could be a credential access problem → send the client key to the hosting provider / IT operations:
Using a tool like Admin API or Admin App, confirm that the key is configured for access to the intended namespace.
Using Tokeninfo endpoint, confirm that the key is configured for access to the intended namespace.

urn:ed-fi:api:security:authorization

Student / Parent / Staff Relationship Does Not Exist

This frequently trips up folks new to working with the Ed-Fi API: once you create a student, parent, or staff, most* client credentials cannot immediately access that record (* depending on the claimset configured for those client credentials). In order to access, there must be a relationship expressed as an appropriate studentSchoolAssociation , studentParentAssociation , or staffSchoolAssociation.

Details

Example

HTTP Request

## HTTP Request 1
POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/Students
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
  "studentUniqueId": "123456789",
  "firstName": "Amelia",
  "lastSurname": "Earhart",
  "BirthDate": "2010-01-13"
}

## HTTP Request 2
GET https://api-stage.ed-fi.org:443/v7.1/api/data/v3/ed-fi/students/e31429919e6546e8905635d7858f2e80
Authorization: Bearer fd964160527941a39875e821d2622088

HTTP Response

## HTTP Response 1

HTTP 1.1 201 Created
location: https://api.ed-fi.org/v6.1/api/data/v3/ed-fi/parents/3f375bc2ac5c4a709a168616afb4772e


## HTTP Response 2

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized. Hint: You may need to create a corresponding 'StudentSchoolAssociation' item.",
  "type": "urn:ed-fi:api:security:authorization",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "821fe345-ecbf-465c-9831-972a50552d8b",
  "errors": [
    "No relationships have been established between the caller's education organization id claims (255901, 19255901) and the resource item's 'StudentUniqueId' value."
  ]
}

tip

Problem seems likely to be in the client application code → send to application development team for resolution.

Be sure to create an appropriate StudentSchoolAssociation , studentParentAssociation , or staffSchoolAssociation record after creating the corresponding Student , Parent, or Staff object. However, it is conceivable that there is a data problem in the source system, which caused a failure to create the correction Association. It may be necessary to look at earlier error logs to look for a different problem that needs to be resolved in the source system.

Missing Student or Staff

Naturally, the person (student, staff) must exist for creation of another object that relates to that person to succeed. This is a special case that results in 403. Most referential integrity errors receive a 409 response, not a 403 response.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/staffSectionAssociations
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "sectionReference": {
    "localCourseCode": "ALG-1",
    "schoolId": 255901001,
    "schoolYear": 2022,
    "sectionIdentifier": "25590100102Trad220ALG112011",
    "sessionName": "2021-2022 Fall Semester"
  },
  "staffReference": {
    "staffUniqueId": "207270__"
  },
  "beginDate": "2021-08-23",
  "classroomPositionDescriptor": "uri://ed-fi.org/ClassroomPositionDescriptor#Teacher of Record",
  "endDate": "2021-12-17"
}

HTTP Response

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized. Hint: You may need to create corresponding 'StaffEducationOrganizationEmploymentAssociation' or 'StaffEducationOrganizationAssignmentAssociation' items.",
  "type": "urn:ed-fi:api:security:authorization",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "ed590b7b-9059-47b0-a699-ea2ea7edfeaa",
  "errors": [
    "No relationships have been established between the caller's education organization id claims (255901, 19255901) and one or more of the following properties of the resource item: 'SchoolId', 'StaffUniqueId'."
  ]
}

tip

Problem seems likely to be in the application code → send to application development team for resolution.

Be sure to create an appropriate association record only after creating the corresponding Student , Parent, or Staff object.
Interestingly, does not apply to studentSchoolAssociations - in that case, we simply have a normal 409 "invalid-reference" type of message.
However, it is conceivable that there is a data problem in the source system, which caused a failure to create the correction Association. It may be necessary to look at earlier error logs to look for a different problem that needs to be resolved in the source system.

Not Authorized for a School or Education Organization

This is similar to the student / parent / staff problem above. In this case, the client credentials are not configured for access to a given School Id. This is a security measure so that, for example, a source system that is only supposed to access certain schools in a local education agency (say, all middle schools), cannot gain access to other schools.

Example: cannot create a Class Period for a different school

HTTP Request

POST https://api.ed-fi.org/v6.1/api/data/v3/ed-fi/classPeriods
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8
{
  "schoolReference": {
    "schoolId": 55901001
  },
  "classPeriodName": "01 - Traditional",
  "meetingTimes": [
    {
      "endTime": "09:25:00",
      "startTime": "08:35:00"
    }
  ]
}

HTTP Response

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized.",
  "type": "urn:ed-fi:api:security:authorization",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "e4b21549-28d9-4549-bc23-1d681b8ae2b9",
  "errors": [
    "No relationships have been established between the caller's education organization id claims (255901, 19255901) and the resource item's 'SchoolId' value."
  ]
}

Cannot create an Education Organization Association when the credentials are scoped to a particular school.

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentEducationOrganizationAssociations
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8

{
  "studentReference": {
    "studentUniqueId": "604822",
  },
  "educationOrganizationReference": {
    "educationOrganizationId": 1
  }
}

HTTP Response

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized. Hint: You may need to create a corresponding 'StudentSchoolAssociation' item.",
  "type": "urn:ed-fi:api:security:authorization",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "0b5cdbcf-8e6d-4f5d-b0a2-e764da0d9ff6",
  "errors": [
    "No relationships have been established between the caller's education organization id claims (255901, 19255901) and one or more of the following properties of the resource item: 'EducationOrganizationId', 'StudentUniqueId'."
  ]
}

tip

The problem could be in application → have the application development team check first:

Is the correct schoolId being transmitted?
Interestingly, this also occurs if the school does not exist. This is a precaution so that a malicious system cannot "fish" for the existence of otherwise legitimate schoolId 's that they should not be able to access. If
That is correct, then it could be a credential access problem → send the client key to the hosting provider / IT operations:
- Using a tool like Admin API or Admin App, confirm that the key is configured for access to the given school or education organization.
Using Tokeninfo endpoint, confirm that the key is configured for access to the given school or education organization.

urn:ed-fi:api:security:authorization:access-denied:action

The Requested Action Is Not Permitted

Credentials to the Ed-Fi ODS/API are configured with [a claim set](# that defines what the credentials are allowed to do. The following error message indicates that the API client has tried to take an action - in this case, updating a Descriptor - that is not allowed under this claim set.

Details

Example

HTTP Request

 PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors/3a62029e71374c7095d288a6cabae206
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "id": "3a62029e71374c7095d288a6cabae206",
  "codeValue": "Compensatory leave time",
  "description": "Compensatory leave time",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor",
  "shortDescription": "Compensatory leave time"
}

HTTP Response

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized.",
  "type": "urn:ed-fi:api:security:authorization:access-denied:action",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "88d2de05-e1e9-4106-8e72-675dd761a153",
  "errors": [
    "The API client's assigned claim set (currently 'SIS Vendor') must grant permission of the 'http://ed-fi.org/odsapi/actions/update'action on one of the following resource claims: http://ed-fi.org/ods/identity/claims/domains/systemDescriptors, http://ed-fi.org/ods/identity/claims/domains/AbsenceEventCategoryDescriptor"
  ]
}

tip

Problem may be in the client application code → send to application development team for resolution.

Should not be performing this action. On the other hand, if the application development team believes this ought to be a permitted action, then please contact the hosting provider (external) or IT operations (internal hosting) to discuss replacing the credentials with a new client id / secret pair that has greater latitude for action.

urn:ed-fi:api:security:authorization:access-denied:resource

Missing Claim

Details

Example

HTTP Request

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/absenceEventCategoryDescriptors/3a62029e71374c7095d288a6cabae206
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-16

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901
  },
  "fundDimensionReference": {
    "code": "1",
    "fiscalYear": 4022
  },
  "accountIdentifier": "1-1-1000-000",
  "fiscalYear": 2022,
  "accountName": "TOTAL REVENUE FROM LOCAL SOURCES",
  "accountTypeDescriptor": "uri://ed-fi.org/AccountTypeDescriptor#Revenue"
}

HTTP Response

HTTP/1.1 403 Forbidden
Content-Type: application/json; charset=utf-8

{
  "detail": "Access to the requested data could not be authorized.",
  "type": "urn:ed-fi:api:security:authorization:access-denied:resource",
  "title": "Authorization Denied",
  "status": 403,
  "correlationId": "666a1cf2-40df-41cb-8c76-0c0c07d4810c",
  "errors": [
    "The API client's assigned claim set (currently 'SIS Vendor') must grant permission of the 'http://ed-fi.org/odsapi/actions/update'action on one of the following resource claims: http://ed-fi.org/ods/identity/claims/domains/systemDescriptors, http://ed-fi.org/ods/identity/claims/domains/AbsenceEventCategoryDescriptor"
  ]
}

tip

Problem may be in the client application code → send to application development team for resolution.

Should not be performing this action with this key/secret. On the other hand, if the application development team believes this ought to be a permitted action, then please contact the hosting provider (external) or IT operations (internal hosting) to discuss replacing the credentials with a new client id / secret pair that uses a different claimset.

urn:ed-fi:api:not-found

Resource Name Typo

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/academicWeek
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8

{
  "weekIdentifier": "one",
  "beginDate": "2023-09-11",
  "endDate": "2023-09-11",
}

HTTP Response

HTTP/1.1 404 Not Found
Content-Type: application/json; charset=utf-8

{
    "detail": "The specified data could not be found.",
    "type": "urn:ed-fi:api:not-found",
    "title": "Not Found",
    "status": 404,
    "correlationId": "d1a92738-34e7-4650-8f79-7d3bc6492562"
}

tip

The problem is in the client application → send to the application development team:

Review the exact URL / route for accuracy.
- In this case, "academicWeek" should be pluralized to "academicWeeks"
If the host provides Swagger UI, use it to confirm the exact path on the URL.
If everything looks correct, ask the hosting provider if they are running in an instance mode that introduces an additional segment into the URL, for example the school year or a district name.

ID Does Not Exist

Example: resourceId submitted via PUT or DELETE requests doesn't exists.

Details

Example

HTTP Request

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/academicWeek/not-valid-id
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8

{
  "weekIdentifier": "one",
  "beginDate": "2023-09-11",
  "endDate": "2023-09-11",
}

HTTP Response

HTTP/1.1 404 Not Found
Content-Type: application/json; charset=utf-8

{
    "detail": "The specified item could not be found.",
    "type": "urn:ed-fi:api:not-found",
    "title": "Not Found",
    "status": 404,
    "correlationId": "8cdf37d9-f2cb-4104-8a5f-8cbaf96ca53f"
}

tip

The problem is in the client application → send to the application development team:

If the route is fully correct, and the ID is wrong, then may need to perform a GET request by natural key to lookup the correct ID before issuing a PUT or DELETE request.

405 Method Not Allowed

urn:ed-fi:api:method-not-allowed

POST Request with an ID in the URL

POST requests must not have an Ed-Fi ID value in the URL. The request is processed using "upsert" semantics where the natural key value from the request body is used to locate and update the existing resource item if it exists; otherwise, a new item is created.

Details

Example

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentAcademicRecords/8cdf37d9-f2cb-4104-8a5f-8cbaf96ca53f
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901001
  },
  "schoolYearTypeReference": {
    "schoolYear": 2022
  },
  "studentReference": {
    "studentUniqueId": "604874"
  },
  "termDescriptor": "uri://ed-fi.org/TermDescriptor#Fall Semester",
  "gradePointAverages": [
    {
      "gradePointAverageTypeDescriptor": "uri://ed-fi.org/GradePointAverageTypeDescriptor#Unweighted",
      "gradePointAverageValue": 4,
      "isCumulative": true
    }
  ]
}

HTTP Response

HTTP/1.1 405 Method Not Allowed
Content-Type: application/json; charset=utf-8


{
   "detail": "The request construction was invalid.",
    "type": "urn:ed-fi:api:method-not-allowed",
    "title": "Method Not Allowed",
    "status": 405,
    "correlationId": "1fb5868c-f6d9-4fd5-afe6-f11549b0ef49",
    "errors": [
        "Resource items can only be updated using PUT. To \"upsert\" an item in the data collection using POST, remove the \"id\" from the route."
    ]
}

tip

The problem is in the client application → send to the application development team:

405 errors are most likely issues that need to be resolved by changing client application code.

DELETE or PUT Request without an ID in the URL

DELETE and PUT requests must have an Ed-Fi ID value in the URL to point to the exact record to remove or modify.

Details

Example

HTTP Request

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentAcademicRecords
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8

{
  "id": "d074a26cec7449299f701ba54e0f0257",
  "educationOrganizationReference": {
    "educationOrganizationId": 255901001
  },
  "schoolYearTypeReference": {
    "schoolYear": 2022
  },
  "studentReference": {
    "studentUniqueId": "604874"
  },
  "termDescriptor": "uri://ed-fi.org/TermDescriptor#Fall Semester",
  "gradePointAverages": [
    {
      "gradePointAverageTypeDescriptor": "uri://ed-fi.org/GradePointAverageTypeDescriptor#Unweighted",
      "gradePointAverageValue": 4,
      "isCumulative": true
    }
  ]
}

HTTP Response

HTTP/1.1 405 Method Not Allowed
Content-Type: application/json; charset=utf-8

{
  "detail": "The request construction was invalid.",
  "type": "urn:ed-fi:api:method-not-allowed",
  "title": "Method Not Allowed",
  "status": 405,
  "correlationId": "8cdf37d9-f2cb-4104-8a5f-8cbaf96ca53f",
  "errors": [
    "Resource collections cannot be replaced. To \"upsert\" an item in the collection, use POST. To update a specific item, use PUT and include the \"id\" in the route."
  ]
}

HTTP Request

DELETE https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/studentAcademicRecords
Authorization: Bearer fd964160527941a39875e821d2622088

HTTP Response

HTTP/1.1 405 Method Not Allowed
Content-Type: application/json; charset=utf-8

{
  "detail": "The request construction was invalid.",
  "type": "urn:ed-fi:api:method-not-allowed",
  "title": "Method Not Allowed",
  "status": 405,
  "correlationId": "19c8946457e7",
  "errors": [
    "Resource collections cannot be deleted. To delete a specific item, use DELETE and include the \"id\" in the route."
  ]
}

tip

The problem is in the application code → send to application development team for resolution.

The Ed-Fi id value can be found either:
- In the location header returned from a POST request, or
- By doing a GET request and pulling the id from the response
Append the id value at the end of the URL. In this case, the URL should be https://api.ed-fi.org/v6.1/api/data/v3/ed-fi/studentAcademicRecords/d074a26cec7449299f701ba54e0f0257

PATCH Requests

The ODS API doesn't support PATCH requests; to update data, use PUT requests instead.

Details

Example

HTTP Request

PATCH https://api.ed-fi.org/v6.1/api/data/v3/ed-fi/students/1765c75f180a4981b7a2a47974ba14d9
Authorization: Bearer fd964160527941a39875e821d2622088
Content-Type: application/json; charset=utf-8
{
 "studentUniqueId": "604821",
    "birthDate": "2014-11-13",
    "firstName": "John",
    "lastSurname": "Doe"
}

HTTP Response

HTTP/1.1 405 Method Not Allowed
Content-Type: application/json; charset=utf-8

{
    "detail": "The request construction was invalid.",
    "type": "urn:ed-fi:api:method-not-allowed",
    "title": "Method Not Allowed",
    "status": 405,
    "correlationId": "3f95df18-185c-4872-b412-b19021bef5d0",
    "errors": [
        "The endpoint of the request does not support the 'PATCH' method."
    ]
}

409 Conflict

urn:ed-fi:api:data-conflict:dependent-item-exists

Dependent Item Exists

When resource A depends on resource B, you cannot delete an instance of resource B without first deleting all resource A instances that depend on that to-be-deleted instance of B. Translation: cannot delete a parent record when there are still existing child records.

Details

Example

HTTP Request

DELETE https://api.ed-fi.org:443/v6.1/api/data/v3/ed-fi/students/3d3ad42503b443489471b74c05067628
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

HTTP Response

HTTP/1.1 409 Conflict
Content-Type: application/json; charset=utf-8

{
  "detail": "The requested action cannot be performed because this item is referenced by an existing 'StudentSectionAttendanceEvent' item.",
  "type": "urn:ed-fi:api:data-conflict:dependent-item-exists",
  "title": "Dependent Item Exists",
  "status": 409,
  "correlationId": "2823d18c-7cff-452f-83d7-8d7e2cac700c"
}

tip

Problem might be in the client application code → send to application development team for resolution.

Be sure to delete data following the required Resource Dependency Order in reverse order (delete children first).
This specific case may have arisen because a Student Unique ID changed. This value is a natural key that is cannot be updated via a PUT request (see Cascading Key Updates on ODS / API Resources for those natural keys that can be updated via a PUT request). Because of this, the student record needs to be delete

urn:ed-fi:api:data-conflict:unresolved-reference

Unresolved Reference

The ODS/API application enforces referential integrity: whenever a property is named ___Reference, the key values in that reference must match the identifying values of an existing object in the database.

Example

In this example we have two references that could cause the POST (or a similar PUT request) to be rejected: the school, and the school year. School year is unusual in the ODS/API in that it comes preconfigured. By default, the Ed-Fi ODS/API recognizes school years 1991-2050. Each implementation can change that list through the edfi.SchoolYearType table. There is a schoolYearTypes resource in the API; however, not all credentials are able to access it.

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/calendars
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "schoolReference": {
    "schoolId": 255901107
  },
  "schoolYearTypeReference": {
    "schoolYear": 4022
  },
  "calendarCode": "2010605675",
  "calendarTypeDescriptor": "uri://ed-fi.org/CalendarTypeDescriptor#Student Specific"
}

HTTP Response

HTTP/1.1 409 Conflict
Content-Type: application/json; charset=utf-8

{
  "detail": "The referenced 'SchoolYearType' item does not exist.",
  "type": "urn:ed-fi:api:data-conflict:unresolved-reference",
  "title": "Unresolved Reference",
  "status": 409,
  "correlationId": "ff1caa62-923a-4536-9998-cd38528c63a2"
}

Example

This chartOfAccounts is referencing a fundDimension that does not exist yet.

HTTP Request

POST https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/chartOfAccounts
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
  "educationOrganizationReference": {
    "educationOrganizationId": 255901
  },
  "fundDimensionReference": {
    "code": "1_",
    "fiscalYear": 2022
  },
  "sourceDimensionReference": {
    "code": "1000",
    "fiscalYear": 2022
  },
  "accountIdentifier": "1-1-1000-000",
  "fiscalYear": 2022,
  "accountName": "TOTAL REVENUE FROM LOCAL SOURCES",
  "accountTypeDescriptor": "uri://ed-fi.org/AccountTypeDescriptor#Revenue",
  "reportingTags": [
    {
      "reportingTagDescriptor": "uri://ed-fi.org/ReportingTagDescriptor#LEA",
      "tagValue": "$308,136,446"
    }
  ]
}

HTTP Response

HTTP/1.1 409 Conflict
Content-Type: application/json; charset=utf-8

{
  "detail": "The referenced 'FundDimension' item does not exist.",
  "type": "urn:ed-fi:api:data-conflict:unresolved-reference",
  "title": "Unresolved Reference",
  "status": 409,
  "correlationId": "7d82b925-ff8f-48e6-a84e-9559e14b5921"
}

Example

Referenced Student doesn't exist while creating a primary relationship used for authorization. This is a special case that results in 409. Most referential integrity errors receive a 409 response, not a 403 response.

HTTP Request

POST https://api.ed-fi.org:443/v7.2/api/data/v3/ed-fi/StudentSchoolAssociations
Authorization: bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json

{
  "classOfSchoolYearTypeReference": {
    "schoolYear": 2027
  },
  "schoolReference": {
    "schoolId": 255901001
  },
  "studentReference": {
    "studentUniqueId": "i don't exist"
  },
  "entryDate": "1903-03-18",
  "entryGradeLevelDescriptor": "uri://ed-fi.org/GradeLevelDescriptor#First grade",
  "entryTypeDescriptor": "uri://ed-fi.org/EntryTypeDescriptor#Next year school",
  "residencyStatusDescriptor": "uri://ed-fi.org/ResidencyStatusDescriptor#Resident of admin unit and school area"
}

HTTP Response

HTTP/1.1 409 Conflict
Content-Type: application/json; charset=utf-8

{
  "detail": "The referenced 'Student' item does not exist.",
  "type": "urn:ed-fi:api:data-conflict:unresolved-reference",
  "title": "Unresolved Reference",
  "status": 409,
  "correlationId": "a4a6874f-19ad-4afc-9bf0-745bc3d06866"
}

tip

Problem might be in the client application code → send to application development team for resolution.

Be sure to submit data following the required Resource Dependency Order.
For school year: if the year is correct, and still getting the error, check with the API hosting provider to find out what school years are allowed.
Alternately, the code might be correct, and there could be an "upstream" problem → send for application user review.
Was there an error when synchronizing the upstream resource, such that it did not save correctly? In the above example, look to see if there was an error when creating the fundDimension. If so, might need to correct something on one or more Student records in order to complete the Student synchronization and then re-try the chartOfAccounts synchronization.

urn:ed-fi:api:data-conflict:non-unique-identity

Identifying Values Are Not Unique

A PUT request can be used to update a natural key field on selected resources. However, API will error if a resource is being updated with a key that is already in use by another resource. ODS / API enforces uniqueness of natural keys of the resources.

Example

In this example we are updating the key fields of a classperiods resource with PUT operation. The key being updated is already assigned to another resource the ODS.

HTTP Request

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/classPeriods/d327e6013bff4c7783ecdbbb420b23bb
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
Content-Type: application/json; charset=utf-8

{
    "schoolReference": {
      "schoolId": 255901044
    },
    "classPeriodName": "01 - Traditional",
    "meetingTimes": [
      {
        "endTime": "09:05:00",
        "startTime": "08:15:00"
      }
    ]
  }

HTTP Response

HTTP/1.1 409 Conflict
Content-Type: application/json; charset=utf-8

{
  "detail": "The identifying value(s) of the item are the same as another item that already exists."
  "type": "urn:ed-fi:api:data-conflict:non-unique-identity",
  "title": "Identifying Values Are Not Unique",
  "status": 409,
  "errors": [
    "A primary key conflict occurred when attempting to create or update a record in the 'ClassPeriod' table. The duplicate key is (ClassPeriodName, SchoolId) = (01 - Traditional, 255901044)."
  ],
  "correlationId": "20fbdf7b-661b-4d3d-8950-bd82efe3da4c"
}

412 Precondition Failed

urn:ed-fi:api:optimistic-lock-failed

The only occurs when opting into the eTag feature. First, the API client must have retrieved a record by ID or by any query. The response body will contain an _etag property. That _etag value can then be used in a If-Match header on a PUT request. If a different API client updates the resource before your client can do so, the _etag value will have changed and the If-Match fails, resulting in Status Code 412.

Details

Example

HTTP Request

## HTTP Request - GET an academicWeek
GET https://api.ed-fi.org/v6.1/api/data/v3/ed-fi/academicWeeks
Authorization: Bearer 6f5bb488a65948b5b847b561b23e


## HTTP Request - PUT request, assuming another client came in between and
# already updated the object, causing an _etag mismatch. Notice the extra
# If-Match header

PUT https://api.ed-fi.org/v7.2/api/data/v3/ed-fi/academicWeeks/cc91fb951b0c4cb7ae0ed56ac0691fb6
Authorization: Bearer 6f5bb488a65948b5b847b561b23e
If-Match: 5250093105232954695

{
   "id": "cc91fb951b0c4cb7ae0ed56ac0691fb6",
    "schoolReference": {
      "schoolId": 255901001
    },
    "weekIdentifier": "identifier-one",
    "beginDate": "2023-09-11",
    "endDate": "2023-09-11",
    "totalInstructionalDays": 5,
 }

HTTP Response

HTTP/1.1 200 OK Content-Type: application/json; charset=utf-8
Content-Type: application/json; charset=utf-8

[
  {
    "id": "cc91fb951b0c4cb7ae0ed56ac0691fb6",
    "schoolReference": {
      "schoolId": 255901001,
      "link": {
        "rel": "School",
        "href": "/ed-fi/schools/83178b254fc943d8a4a90043fbcfc127"
      }
    },
    "weekIdentifier": "identifier-one",
    "beginDate": "2023-09-11",
    "endDate": "2023-09-11",
    "totalInstructionalDays": 0,
    "_etag": "5250093105232954695",
    "_lastModifiedDate": "2024-01-13T02:11:20.5566791Z"
  }
]

## HTTP Response 2

HTTP/1.1 412 Precondition Failed Content-Type: application/json; charset=utf-8
{
  "detail": "The item has been modified by another user.",
  "type": "urn:ed-fi:api:optimistic-lock-failed",
  "title": "Optimistic Lock Failed",
  "status": 412,
  "correlationId": "8b7835b3-f340-4dc8-9cff-e354d2a6f472"
}

tip

Problem might be in the application code → send to application development team for resolution. One possible workflow for correcting the issue:

Retrieve the object again.
Update only the fields that should be the "exclusive" domain of your API client.
Re-submit the PUT request.

415 Unsupported Media Type

This occurs when the content-type header is missing or is not "application/json".

Details

Example

HTTP Request

POST https://api.ed-fi.org:443/v5.3/api/data/v3/ed-fi/absenceEventCategoryDescriptors
Authorization: bearer 6f5bb488a65948b5b847b561b23e

{
  "description": "Bereavement",
  "namespace": "uri://ed-fi.org/AbsenceEventCategoryDescriptor"
}

HTTP Response

HTTP/1.1 415 Unsupported Media Type
Content-Type: application/json; charset=utf-8

{
  "detail": "The request construction was invalid.",
  "type": "urn:ed-fi:api:unsupported-media-type",
  "title": "Unsupported Media Type",
  "status": 415,
  "correlationId": "488de6e3-04e6-4ac5-86a4-6eeb409e4e2b",
  "errors": [
    "The value specified in the 'Content-Type' header is not supported by this host."
  ]
}

tip

Problem is in the application code → send to application development team for resolution.

Be sure to provide the header Content-Type: application/json.
The charset is optional and assumed to be UTF-8 when omitted.

500 Internal Server Error

This is a catch-all for various errors that can occur on the server. Review this section for possible reasons for the error.

400 Bad Request​

urn:ed-fi:api:bad-request:data-validation-failed:key-change-not-supported​

Identifying values for the resource cannot be changed​

Resource identifiers cannot be assigned by the client​

Missing a Required Property​

String Length Validation Error​

Non-Compliant JSON Body​

Integer Overflow​

Excessive String Length​

Empty Request Body​

Transmitting in the Wrong Character Encoding​

Potentially Dangerous Value​

Leading or Trailing Whitespace in Natural Key String​

No Item in Required Array​

Missing a Required Property on an Item in a Collection​

Key Unification Error​

Invalid Limit Count​

Descriptor Does Not Exist​

urn:ed-fi:api:profile:invalid-profile-usage​

Invalid Profile Usage​

urn:ed-fi:api:profile:invalid-method-usage​

Invalid Method Usage​

401 Unauthorized​

urn:ed-fi:api:security:authentication​

Missing Authorization header​

Unsupported Authorization header scheme​

Missing or blank token in the Authorization header​

Expired or invalid token in the Authorization header​

403 Forbidden​

urn:ed-fi:api:security:data-policy:incorrect-usage​

Data Policy Failure Due to Incorrect Usage​

urn:ed-fi:api:security:authorization:namespace:access-denied:namespace-mismatch​

Invalid Namespace Prefix​

urn:ed-fi:api:security:authorization​

Student / Parent / Staff Relationship Does Not Exist​

Missing Student or Staff​

Not Authorized for a School or Education Organization​

urn:ed-fi:api:security:authorization:access-denied:action​

The Requested Action Is Not Permitted​

urn:ed-fi:api:security:authorization:access-denied:resource​

Missing Claim​

urn:ed-fi:api:not-found​

Resource Name Typo​

ID Does Not Exist​

405 Method Not Allowed​

urn:ed-fi:api:method-not-allowed​

POST Request with an ID in the URL​

DELETE or PUT Request without an ID in the URL​

PATCH Requests​

409 Conflict​

urn:ed-fi:api:data-conflict:dependent-item-exists​

Dependent Item Exists​

urn:ed-fi:api:data-conflict:unresolved-reference​

Unresolved Reference​

urn:ed-fi:api:data-conflict:non-unique-identity​

Identifying Values Are Not Unique​

412 Precondition Failed​

urn:ed-fi:api:optimistic-lock-failed​

415 Unsupported Media Type​

500 Internal Server Error​

400 Bad Request

urn:ed-fi:api:bad-request:data-validation-failed:key-change-not-supported

Identifying values for the resource cannot be changed

Resource identifiers cannot be assigned by the client

Missing a Required Property

String Length Validation Error

Non-Compliant JSON Body

Integer Overflow

Excessive String Length

Empty Request Body

Transmitting in the Wrong Character Encoding

Potentially Dangerous Value

Leading or Trailing Whitespace in Natural Key String

No Item in Required Array

Missing a Required Property on an Item in a Collection

Key Unification Error

Invalid Limit Count

Descriptor Does Not Exist

urn:ed-fi:api:profile:invalid-profile-usage

Invalid Profile Usage

urn:ed-fi:api:profile:invalid-method-usage

Invalid Method Usage

401 Unauthorized

urn:ed-fi:api:security:authentication

Missing Authorization header

Unsupported Authorization header scheme

Missing or blank token in the Authorization header

Expired or invalid token in the Authorization header

403 Forbidden

urn:ed-fi:api:security:data-policy:incorrect-usage

Data Policy Failure Due to Incorrect Usage

urn:ed-fi:api:security:authorization:namespace:access-denied:namespace-mismatch

Invalid Namespace Prefix

urn:ed-fi:api:security:authorization

Student / Parent / Staff Relationship Does Not Exist

Missing Student or Staff

Not Authorized for a School or Education Organization

urn:ed-fi:api:security:authorization:access-denied:action

The Requested Action Is Not Permitted

urn:ed-fi:api:security:authorization:access-denied:resource

Missing Claim

urn:ed-fi:api:not-found

Resource Name Typo

ID Does Not Exist

405 Method Not Allowed

urn:ed-fi:api:method-not-allowed

POST Request with an ID in the URL

DELETE or PUT Request without an ID in the URL

PATCH Requests

409 Conflict

urn:ed-fi:api:data-conflict:dependent-item-exists

Dependent Item Exists

urn:ed-fi:api:data-conflict:unresolved-reference

Unresolved Reference

urn:ed-fi:api:data-conflict:non-unique-identity

Identifying Values Are Not Unique

412 Precondition Failed

urn:ed-fi:api:optimistic-lock-failed

415 Unsupported Media Type

500 Internal Server Error